China HHD800-J5 Servo Motor Injection Molding Machine,HHD800-J5 Servo Motor Injection Molding Machine Manufacturer
| ITEM | MODEL | UNIT | HHD800-J5 | ||
| A | B | C | |||
| INJECTION UNIT | Screw Diameter | mm | 100 | 105 | 115 |
| Screw L/D Ratio | L/D | 23 | 21.9 | 20 | |
| Shot Size(Theoretical) | cm3 | 4082 | 4500 | 5398 | |
| Injection Weight | g | 3715 | 4095 | 4912 | |
| Injection Rate | g/s | 739 | 815 | 977 | |
| Plasticizing Capacity | g/s | 85 | 94 | 113 | |
| Injection Pressure | Mpa | 194 | 176 | 147 | |
| Screw Speed | rpm | 0-110 | |||
| CLAMPING UNIT | Clamp Tonnage | KN | 8000 | ||
| Toggle Stroke | mm | 1020 | |||
| Space Between Tie-Bars | mm | 980 x980 | |||
| Max.Mold Height | mm | 1000 | |||
| Min.Mold Height | mm | 400 | |||
| GENERAL | Ejector Stroke | mm | 260 | ||
| Ejector Tonnage | KN | 212 | |||
| Ejector Number | Piece | 21 | |||
| Max.Pump pressure | Mpa | 16 | |||
| Pump motor power | KW | 37+37 | |||
| Heater Power | KW | 58.45 | |||
| Machine Dimenshion(LxWxH) | m | 10.1x2.6x3.8 | |||
| Machine Weight | T | 45 | |||
| Oil Tank Capacity | L | 1600 | |||
